NCBI Logo
GEO Logo
   NCBI > GEO > Accession DisplayHelp Not logged in | LoginHelp
GEO help: Mouse over screen elements for information.
          Go
Sample GSM230937 Query DataSets for GSM230937
Status Public on Nov 30, 2007
Title Yeast replication isw2 nhp10 MMS 60min a
Sample type genomic
 
Channel 1
Source name S.cerevisiae, 60min post alpha factor, 0.015% MMS, unreplicated DNA
Organism Saccharomyces cerevisiae
Characteristics Strain: YTT3306 (MATa ade2-1::pRS402 can1-100 his3-11,15 leu2-3,112 trp1-1 ura3-1 RAD5+ isw2::NatMX nhp10::HphMX)
Collected 60 minutes post alpha factor release. Treated with MMS at 0.015%
Unreplicated DNA
Biomaterial provider Jack Vincent / Tsukiyama Lab
Growth protocol Density transfer experiments were performed essentially as described to isotopically label newly replicated DNA (see the Fangman-Brewer lab website at UW). Cells were grown a minimum of 7 generations in minimal medium containing 13C and 15N as the sole carbon and nitrogen sources (dense media). Cells were synchronized with α-factor for 105 minutes. Cells were then filtered and transferred to complete media (YC) containing 12C and 14N (light media) in the continued presence of α-factor for 75 minutes prior to release (termed conditioning phase). MMS was added to 0.015% 15 minutes into the conditioning phase resulting in a 60-minute exposure during G1 arrest. After the conditioning phase, cells were filtered, washed, and released in light media in the presence or absence of 0.015% MMS. This sample was collected at 60 min after release.
Extracted molecule genomic DNA
Extraction protocol Standard Yeast genomic prep: Bead beating + phenol:chloroform extraction.
Unreplicated DNA was separated from replicated in a CsCl gradient (see the Fangman-Brewer lab website at UW.) The CsCl gradient was drip-fractionated. Fractions were then applied to slot blots and probed for DNA content. Fractions from the bottom of the gradient (the most dense fractions) contain unreplicated DNA, while fractions from the top of the gradient (least dense fractions) contain newly replicated DNA. Fractions containing unreplicated DNA (or replicated DNA) were pooled and EtOH precipitated.
Label Cy3
Label protocol 0.5ug of each sample was labeled with either Cy3 or Cy5-dUTP (GE Biosciences). 21ul DNA solution was heat denatured at 100°C for 5 min then quick chilled in an ice slurry. The following was added while samples were still on ice: 5ul 10x dNTP Mix (1.2mM each dATP, dCTP, dGTP; 0.6mM dTTP; 10mM Tris 8.0), 3ul Cy-dUTP, 1ul exo- Klenow (50000 U/ml, New England Biolabs). Samples were incubated at 37°C for 1hr. Reaction was stopped by adding 5ul 0.5M EDTA. 60ul of 1mg/ml tRNA was added to each reaction and unincorporated nucleotides were removed using a Biospin 30 column (BioRad). Oppositely labeled samples (i.e. Cy3-replicated and Cy5-unreplicated) from the same timepoint were combined for cohybridization. 20ul polydA::dT (1mg/ml; Sigma) was added to each probe mix, then DNA was precipitated after addition of 1/10 volume 3M NaOAc and 2 volumes 100% ethanol.
 
Channel 2
Source name S.cerevisiae, 60min post alpha factor, 0.015% MMS, replicated DNA
Organism Saccharomyces cerevisiae
Characteristics Strain: YTT3306 (MATa ade2-1::pRS402 can1-100 his3-11,15 leu2-3,112 trp1-1 ura3-1 RAD5+ isw2::NatMX nhp10::HphMX)
Collected 60 minutes post alpha factor release. Treated with MMS at 0.015%
replicated DNA
Biomaterial provider Jack Vincent / Tsukiyama Lab
Growth protocol same as channel 1
Extracted molecule genomic DNA
Extraction protocol same as channel 1
Label Cy5
Label protocol same as channel 1
 
 
Hybridization protocol • hybridization buffer: 3X SSC + 10%SDS + 1 mg/mL poly(dA)
• blocking agent: no prehybridization
• slide blocking: no prehybridization
• probe blocking: 1mg/mL polydA during hybridization
• wash procedure: wash1: 1X SSC, 0.03% SDS wash2: 1X SSC dip slides 15 times wash3: 0.2X SSC: shake slides 75rpm for 20minutes wash4: 0.05X SSC: shake slides 75rpm for 10 minutes spin-dry slides in centrifuge 50g for 5 minutes.
• quantity of labelled target used: all material generated from 0.5 ug of EcoRI digested genomic DNA
• time, concentration, volume, temperature: 16h, 26 microliters at 63°C
• Hybridization instrument: Manual, TelChem hybridization chambers in waterbath
Scan protocol Scanning hardware GenePix 4000B scanner (Molecular Devices)
Image analysis GenePix Pro v6.0 (Molecular Devices)
Description Unreplicated vs Replicated DNA during MMS treatment
isw2 nhp10 double mutant strain
60 min time-point
Data processing Percent replication for each spot was determined as described (Alvino, GM et al, Mol Cell Bio, 2007). The calculation of percent replication at each time point is dependent on two measurements; the percentage of total genomic replication in the population at each time point and the number of cycling cells over the entire time course. • Total genomic % replication: The total percent replication for the genome was determined after fractionation of each CsCl gradient. Fractions were blotted to a nylon membrane and then hybridized to a radiolabeled genomic probe (as described above). Percent replication was determined by quantifying the signal from each fraction (by phosphorimager), plotting the value for each fraction, and then comparing the area under the curve corresponding to replicated and unreplicated fractions (see http://fangman-brewer.genetics.washington.edu/density_transfer.html).
The total % replication for this sample was as follows: 60min 20%
• Ratio of cycling cells: The ratio of cycling cells to non-cycling cells was estimated from the maximum percentage of budded cells obtained during the time course. The maximum percent budded was 86% for isw2 nhp10 experiments.
 
Submission date Sep 20, 2007
Last update date Aug 14, 2011
Contact name Jack A. Vincent
E-mail(s) [email protected]
Phone 206-667-2986
Organization name Fred Hutchinson CRC
Department Basic Sciences
Lab Tsukiyama
Street address 1100 Fairview Ave N
City Seattle
State/province WA
ZIP/Postal code 98109
Country USA
 
Platform ID GPL1914
Series (1)
GSE9122 Yeast replication in the presence of MMS: WT and isw2 nhp10 strains

Data table header descriptions
id_REF
VALUE Percent replication (normalized data)
F635 Median - BKGND Cy5 Median signal - background signal
F532 Median - BKGND Cy3 Median signal - background signal
Flags GeneSpring flagged spots

Data table
id_REF VALUE F635 Median - BKGND F532 Median - BKGND Flags
YAL001C 66.4248 14000 3197 0
YAL002W 64.0519 13846 3493 0
YAL003W 57.9169 10046 3134 0
YAL004W 34.4407 10887 6008 0
YAL005C 29.4653 15252 11758 0
YAL007C 54.7744 7415 2931 0
YAL008W 54.5734 13349 4333 0
YAL009W 55.5578 24590 7474 0
YAL010C 58.1433 7781 2629 0
YAL011W 45.4508 8075 3948 0
YAL012W 37.4446 7758 5529 0
YAL013W 29.3885 15213 9807 0
YAL014C 34.7157 11209 7522 0
YAL015C 34.9729 15034 9507 0
YAL016W 32.8473 14450 9406 0
YAL017W 19.513 1713 1760 0
YAL018C 32.391 7469 6106 0
YAL019W 24.1466 7380 7135 0
YAL020C 20.566 12238 14921 0
YAL021C 15.1138 5932 11762 0

Total number of rows: 6202

Table truncated, full table size 172 Kbytes.




Supplementary file Size Download File type/resource
GSM230937.gpr.gz 674.5 Kb (ftp)(http) GPR
Processed data included within Sample table

| NLM | NIH | GEO Help | Disclaimer | Accessibility |
NCBI Home NCBI Search NCBI SiteMap