ferritin family protein similar to rubrerythrin, a non-heme di-iron that is involved in oxidative stress defense as a peroxide scavenger in a wide range of organisms
Ferritin-like superfamily of diiron-containing four-helix-bundle proteins; Ferritin-like, ...
57-341
0e+00
Ferritin-like superfamily of diiron-containing four-helix-bundle proteins; Ferritin-like, diiron-carboxylate proteins participate in a range of functions including iron regulation, mono-oxygenation, and reactive radical production. These proteins are characterized by the fact that they catalyze dioxygen-dependent oxidation-hydroxylation reactions within diiron centers; one exception is manganese catalase, which catalyzes peroxide-dependent oxidation-reduction within a dimanganese center. Diiron-carboxylate proteins are further characterized by the presence of duplicate metal ligands, glutamates and histidines (ExxH) and two additional glutamates within a four-helix bundle. Outside of these conserved residues there is little obvious homology. Members include bacterioferritin, ferritin, rubrerythrin, aromatic and alkene monooxygenase hydroxylases (AAMH), ribonucleotide reductase R2 (RNRR2), acyl-ACP-desaturases (Acyl_ACP_Desat), manganese (Mn) catalases, demethoxyubiquinone hydroxylases (DMQH), DNA protecting proteins (DPS), and ubiquinol oxidases (AOX), and the aerobic cyclase system, Fe-containing subunit (ACSF).
The actual alignment was detected with superfamily member PLN02492:
Pssm-ID: 469698 Cd Length: 324 Bit Score: 538.48 E-value: 0e+00
Ribonucleotide Reductase, R2/beta subunit, ferritin-like diiron-binding domain; Ribonucleotide Reductase, R2/beta subunit (RNRR2) is a member of a broad superfamily of ferritin-like diiron-carboxylate proteins. The RNR protein catalyzes the conversion of ribonucleotides to deoxyribonucleotides and is found in all eukaryotes, many prokaryotes, several viruses, and few archaea. The catalytically active form of RNR is a proposed alpha2-beta2 tetramer. The homodimeric alpha subunit (R1) contains the active site and redox active cysteines as well as the allosteric binding sites. The beta subunit (R2) contains a diiron cluster that, in its reduced state, reacts with dioxygen to form a stable tyrosyl radical and a diiron(III) cluster. This essential tyrosyl radical is proposed to generate a thiyl radical, located on a cysteine residue in the R1 active site that initiates ribonucleotide reduction. The beta subunit is composed of 10-13 helices, the 8 longest helices form an alpha-helical bundle; some have 2 addition beta strands. Yeast is unique in that it assembles both homodimers and heterodimers of RNRR2. The yeast heterodimer, Y2Y4, contains R2 (Y2) and a R2 homolog (Y4) that lacks the diiron center and is proposed to only assist in cofactor assembly, and perhaps stabilize R1 (Y1) in its active conformation.
Pssm-ID: 153108 [Multi-domain] Cd Length: 288 Bit Score: 355.01 E-value: 4.75e-123
Ribonucleotide reductase beta subunit, ferritin-like domain [Nucleotide transport and ...
46-329
6.07e-99
Ribonucleotide reductase beta subunit, ferritin-like domain [Nucleotide transport and metabolism]; Ribonucleotide reductase beta subunit, ferritin-like domain is part of the Pathway/BioSystem: Pyrimidine salvage
Pssm-ID: 439978 [Multi-domain] Cd Length: 326 Bit Score: 295.15 E-value: 6.07e-99
Ribonucleotide Reductase, R2/beta subunit, ferritin-like diiron-binding domain; Ribonucleotide Reductase, R2/beta subunit (RNRR2) is a member of a broad superfamily of ferritin-like diiron-carboxylate proteins. The RNR protein catalyzes the conversion of ribonucleotides to deoxyribonucleotides and is found in all eukaryotes, many prokaryotes, several viruses, and few archaea. The catalytically active form of RNR is a proposed alpha2-beta2 tetramer. The homodimeric alpha subunit (R1) contains the active site and redox active cysteines as well as the allosteric binding sites. The beta subunit (R2) contains a diiron cluster that, in its reduced state, reacts with dioxygen to form a stable tyrosyl radical and a diiron(III) cluster. This essential tyrosyl radical is proposed to generate a thiyl radical, located on a cysteine residue in the R1 active site that initiates ribonucleotide reduction. The beta subunit is composed of 10-13 helices, the 8 longest helices form an alpha-helical bundle; some have 2 addition beta strands. Yeast is unique in that it assembles both homodimers and heterodimers of RNRR2. The yeast heterodimer, Y2Y4, contains R2 (Y2) and a R2 homolog (Y4) that lacks the diiron center and is proposed to only assist in cofactor assembly, and perhaps stabilize R1 (Y1) in its active conformation.
Pssm-ID: 153108 [Multi-domain] Cd Length: 288 Bit Score: 355.01 E-value: 4.75e-123
Ribonucleotide reductase beta subunit, ferritin-like domain [Nucleotide transport and ...
46-329
6.07e-99
Ribonucleotide reductase beta subunit, ferritin-like domain [Nucleotide transport and metabolism]; Ribonucleotide reductase beta subunit, ferritin-like domain is part of the Pathway/BioSystem: Pyrimidine salvage
Pssm-ID: 439978 [Multi-domain] Cd Length: 326 Bit Score: 295.15 E-value: 6.07e-99
Ribonucleotide Reductase R2-like protein, Mn/Fe-binding domain; Rv0233 is a Mycobacterium ...
43-288
4.80e-07
Ribonucleotide Reductase R2-like protein, Mn/Fe-binding domain; Rv0233 is a Mycobacterium tuberculosis ribonucleotide reductase R2 protein with a heterodinuclear manganese/iron-carboxylate cofactor located in its metal center. The Rv0233-like family may represent a structural/functional counterpart of the evolutionary ancestor of the RNRR2's (Ribonucleotide Reductase, R2/beta subunit) and the bacterial multicomponent monooxygenases. RNRR2s belong to a broad superfamily of ferritin-like diiron-carboxylate proteins. The RNR protein catalyzes the conversion of ribonucleotides to deoxyribonucleotides and is found in prokaryotes and archaea. The catalytically active form of RNR is a proposed alpha2-beta2 tetramer. The homodimeric alpha subunit (R1) contains the active site and redox active cysteines as well as the allosteric binding sites.
Pssm-ID: 153120 Cd Length: 280 Bit Score: 50.42 E-value: 4.80e-07
Database: CDSEARCH/cdd Low complexity filter: no Composition Based Adjustment: yes E-value threshold: 0.01
References:
Wang J et al. (2023), "The conserved domain database in 2023", Nucleic Acids Res.51(D)384-8.
Lu S et al. (2020), "The conserved domain database in 2020", Nucleic Acids Res.48(D)265-8.
Marchler-Bauer A et al. (2017), "CDD/SPARCLE: functional classification of proteins via subfamily domain architectures.", Nucleic Acids Res.45(D)200-3.
of the residues that compose this conserved feature have been mapped to the query sequence.
Click on the triangle to view details about the feature, including a multiple sequence alignment
of your query sequence and the protein sequences used to curate the domain model,
where hash marks (#) above the aligned sequences show the location of the conserved feature residues.
The thumbnail image, if present, provides an approximate view of the feature's location in 3 dimensions.
Click on the triangle for interactive 3D structure viewing options.
Functional characterization of the conserved domain architecture found on the query.
Click here to see more details.
This image shows a graphical summary of conserved domains identified on the query sequence.
The Show Concise/Full Display button at the top of the page can be used to select the desired level of detail: only top scoring hits
(labeled illustration) or all hits
(labeled illustration).
Domains are color coded according to superfamilies
to which they have been assigned. Hits with scores that pass a domain-specific threshold
(specific hits) are drawn in bright colors.
Others (non-specific hits) and
superfamily placeholders are drawn in pastel colors.
if a domain or superfamily has been annotated with functional sites (conserved features),
they are mapped to the query sequence and indicated through sets of triangles
with the same color and shade of the domain or superfamily that provides the annotation. Mouse over the colored bars or triangles to see descriptions of the domains and features.
click on the bars or triangles to view your query sequence embedded in a multiple sequence alignment of the proteins used to develop the corresponding domain model.
The table lists conserved domains identified on the query sequence. Click on the plus sign (+) on the left to display full descriptions, alignments, and scores.
Click on the domain model's accession number to view the multiple sequence alignment of the proteins used to develop the corresponding domain model.
To view your query sequence embedded in that multiple sequence alignment, click on the colored bars in the Graphical Summary portion of the search results page,
or click on the triangles, if present, that represent functional sites (conserved features)
mapped to the query sequence.
Concise Display shows only the best scoring domain model, in each hit category listed below except non-specific hits, for each region on the query sequence.
(labeled illustration) Standard Display shows only the best scoring domain model from each source, in each hit category listed below for each region on the query sequence.
(labeled illustration) Full Display shows all domain models, in each hit category below, that meet or exceed the RPS-BLAST threshold for statistical significance.
(labeled illustration) Four types of hits can be shown, as available,
for each region on the query sequence:
specific hits meet or exceed a domain-specific e-value threshold
(illustrated example)
and represent a very high confidence that the query sequence belongs to the same protein family as the sequences use to create the domain model
non-specific hits
meet or exceed the RPS-BLAST threshold for statistical significance (default E-value cutoff of 0.01, or an E-value selected by user via the
advanced search options)
the domain superfamily to which the specific and non-specific hits belong
multi-domain models that were computationally detected and are likely to contain multiple single domains
Retrieve proteins that contain one or more of the domains present in the query sequence, using the Conserved Domain Architecture Retrieval Tool
(CDART).
Modify your query to search against a different database and/or use advanced search options
