lipoate--protein ligase A catalyzes both the ATP-dependent activation of exogenously supplied lipoate to lipoyl-AMP and the transfer of the activated lipoyl onto the lipoyl domains of lipoate-dependent enzymes; also catalyzes very poorly the transfer of lipoyl and octanoyl moiety from their acyl carrier protein
lipoyltransferase and lipoate-protein ligase; One member of this group of proteins is bovine ...
4-315
5.27e-140
lipoyltransferase and lipoate-protein ligase; One member of this group of proteins is bovine lipoyltransferase, which transfers the lipoyl group from lipoyl-AMP to the specific Lys of lipoate-dependent enzymes. However, it does not first activate lipoic acid with ATP to create lipoyl-AMP and pyrophosphate. Another member of this group, lipoate-protein ligase A from E. coli, catalyzes both the activation and the transfer of lipoate. Homology between the two is full-length, except for the bovine mitochondrial targeting signal, but is strongest toward the N-terminus. [Protein fate, Protein modification and repair]
Pssm-ID: 161920 [Multi-domain] Cd Length: 324 Bit Score: 399.58 E-value: 5.27e-140
lipoate-protein ligase; Lipoate-protein ligase A (LplA) catalyzes the formation of an amide ...
11-208
1.73e-71
lipoate-protein ligase; Lipoate-protein ligase A (LplA) catalyzes the formation of an amide linkage between free lipoic acid and a specific lysine residue of the lipoyl domain in lipoate dependent enzymes, similar to the biotinylation reaction mediated by biotinyl protein ligase (BPL). The two step reaction includes activation of exogenously supplied lipoic acid at the expense of ATP to lipoyl-AMP and then transfer to the epsilon-amino group of a specific lysine residue of the lipoyl domain of the target protein.
Pssm-ID: 319742 Cd Length: 209 Bit Score: 220.97 E-value: 1.73e-71
Bacterial lipoate protein ligase C-terminus; This is the C-terminal domain of a bacterial ...
249-333
3.67e-23
Bacterial lipoate protein ligase C-terminus; This is the C-terminal domain of a bacterial lipoate protein ligase. There is no conservation between this C-terminus and that of vertebrate lipoate protein ligase C-termini, but both are associated with the domain BPL_LipA_LipB pfam03099, further upstream. This domain is required for adenylation of lipoic acid by lipoate protein ligases. The domain is not required for transfer of lipoic acid from the adenylate to the lipoyl domain. Upon adenylation, this domain rotates 180 degrees away from the active site cleft. Therefore, the domain does not interact with the lipoyl domain during transfer.
Pssm-ID: 431286 [Multi-domain] Cd Length: 85 Bit Score: 91.38 E-value: 3.67e-23
lipoyltransferase and lipoate-protein ligase; One member of this group of proteins is bovine ...
4-315
5.27e-140
lipoyltransferase and lipoate-protein ligase; One member of this group of proteins is bovine lipoyltransferase, which transfers the lipoyl group from lipoyl-AMP to the specific Lys of lipoate-dependent enzymes. However, it does not first activate lipoic acid with ATP to create lipoyl-AMP and pyrophosphate. Another member of this group, lipoate-protein ligase A from E. coli, catalyzes both the activation and the transfer of lipoate. Homology between the two is full-length, except for the bovine mitochondrial targeting signal, but is strongest toward the N-terminus. [Protein fate, Protein modification and repair]
Pssm-ID: 161920 [Multi-domain] Cd Length: 324 Bit Score: 399.58 E-value: 5.27e-140
lipoate-protein ligase; Lipoate-protein ligase A (LplA) catalyzes the formation of an amide ...
11-208
1.73e-71
lipoate-protein ligase; Lipoate-protein ligase A (LplA) catalyzes the formation of an amide linkage between free lipoic acid and a specific lysine residue of the lipoyl domain in lipoate dependent enzymes, similar to the biotinylation reaction mediated by biotinyl protein ligase (BPL). The two step reaction includes activation of exogenously supplied lipoic acid at the expense of ATP to lipoyl-AMP and then transfer to the epsilon-amino group of a specific lysine residue of the lipoyl domain of the target protein.
Pssm-ID: 319742 Cd Length: 209 Bit Score: 220.97 E-value: 1.73e-71
biotin-lipoate ligase family; This family includes biotin protein ligase (BPL), ...
5-208
3.88e-57
biotin-lipoate ligase family; This family includes biotin protein ligase (BPL), lipoate-protein ligase A (LplA) and octanoyl-[acyl carrier protein]-protein acyltransferase (LipB). Biotin is covalently attached at the active site of certain enzymes that transfer carbon dioxide from bicarbonate to organic acids to form cellular metabolites. Biotin protein ligase (BPL) is the enzyme responsible for attaching biotin to a specific lysine at the active site of biotin enzymes. Biotin attachment is a two step reaction that results in the formation of an amide linkage between the carboxyl group of biotin and the epsilon-amino group of the modified lysine. Lipoate-protein ligase A (LplA) catalyses the formation of an amide linkage between lipoic acid and a specific lysine residue in lipoate dependent enzymes.
Pssm-ID: 319740 Cd Length: 198 Bit Score: 183.89 E-value: 3.88e-57
Bacterial lipoate protein ligase C-terminus; This is the C-terminal domain of a bacterial ...
249-333
3.67e-23
Bacterial lipoate protein ligase C-terminus; This is the C-terminal domain of a bacterial lipoate protein ligase. There is no conservation between this C-terminus and that of vertebrate lipoate protein ligase C-termini, but both are associated with the domain BPL_LipA_LipB pfam03099, further upstream. This domain is required for adenylation of lipoic acid by lipoate protein ligases. The domain is not required for transfer of lipoic acid from the adenylate to the lipoyl domain. Upon adenylation, this domain rotates 180 degrees away from the active site cleft. Therefore, the domain does not interact with the lipoyl domain during transfer.
Pssm-ID: 431286 [Multi-domain] Cd Length: 85 Bit Score: 91.38 E-value: 3.67e-23
Biotin/lipoate A/B protein ligase family; This family includes biotin protein ligase, ...
62-158
2.41e-05
Biotin/lipoate A/B protein ligase family; This family includes biotin protein ligase, lipoate-protein ligase A and B. Biotin is covalently attached at the active site of certain enzymes that transfer carbon dioxide from bicarbonate to organic acids to form cellular metabolites. Biotin protein ligase (BPL) is the enzyme responsible for attaching biotin to a specific lysine at the active site of biotin enzymes. Each organizm probably has only one BPL. Biotin attachment is a two step reaction that results in the formation of an amide linkage between the carboxyl group of biotin and the epsilon-amino group of the modified lysine. Lipoate-protein ligase A (LPLA) catalyzes the formation of an amide linkage between lipoic acid and a specific lysine residue in lipoate dependent enzymes. The unusual biosynthesis pathway of lipoic acid is mechanistically intertwined with attachment of the cofactor.
Pssm-ID: 427135 Cd Length: 132 Bit Score: 43.58 E-value: 2.41e-05
Database: CDSEARCH/cdd Low complexity filter: no Composition Based Adjustment: yes E-value threshold: 0.01
References:
Wang J et al. (2023), "The conserved domain database in 2023", Nucleic Acids Res.51(D)384-8.
Lu S et al. (2020), "The conserved domain database in 2020", Nucleic Acids Res.48(D)265-8.
Marchler-Bauer A et al. (2017), "CDD/SPARCLE: functional classification of proteins via subfamily domain architectures.", Nucleic Acids Res.45(D)200-3.
of the residues that compose this conserved feature have been mapped to the query sequence.
Click on the triangle to view details about the feature, including a multiple sequence alignment
of your query sequence and the protein sequences used to curate the domain model,
where hash marks (#) above the aligned sequences show the location of the conserved feature residues.
The thumbnail image, if present, provides an approximate view of the feature's location in 3 dimensions.
Click on the triangle for interactive 3D structure viewing options.
Functional characterization of the conserved domain architecture found on the query.
Click here to see more details.
This image shows a graphical summary of conserved domains identified on the query sequence.
The Show Concise/Full Display button at the top of the page can be used to select the desired level of detail: only top scoring hits
(labeled illustration) or all hits
(labeled illustration).
Domains are color coded according to superfamilies
to which they have been assigned. Hits with scores that pass a domain-specific threshold
(specific hits) are drawn in bright colors.
Others (non-specific hits) and
superfamily placeholders are drawn in pastel colors.
if a domain or superfamily has been annotated with functional sites (conserved features),
they are mapped to the query sequence and indicated through sets of triangles
with the same color and shade of the domain or superfamily that provides the annotation. Mouse over the colored bars or triangles to see descriptions of the domains and features.
click on the bars or triangles to view your query sequence embedded in a multiple sequence alignment of the proteins used to develop the corresponding domain model.
The table lists conserved domains identified on the query sequence. Click on the plus sign (+) on the left to display full descriptions, alignments, and scores.
Click on the domain model's accession number to view the multiple sequence alignment of the proteins used to develop the corresponding domain model.
To view your query sequence embedded in that multiple sequence alignment, click on the colored bars in the Graphical Summary portion of the search results page,
or click on the triangles, if present, that represent functional sites (conserved features)
mapped to the query sequence.
Concise Display shows only the best scoring domain model, in each hit category listed below except non-specific hits, for each region on the query sequence.
(labeled illustration) Standard Display shows only the best scoring domain model from each source, in each hit category listed below for each region on the query sequence.
(labeled illustration) Full Display shows all domain models, in each hit category below, that meet or exceed the RPS-BLAST threshold for statistical significance.
(labeled illustration) Four types of hits can be shown, as available,
for each region on the query sequence:
specific hits meet or exceed a domain-specific e-value threshold
(illustrated example)
and represent a very high confidence that the query sequence belongs to the same protein family as the sequences use to create the domain model
non-specific hits
meet or exceed the RPS-BLAST threshold for statistical significance (default E-value cutoff of 0.01, or an E-value selected by user via the
advanced search options)
the domain superfamily to which the specific and non-specific hits belong
multi-domain models that were computationally detected and are likely to contain multiple single domains
Retrieve proteins that contain one or more of the domains present in the query sequence, using the Conserved Domain Architecture Retrieval Tool
(CDART).
Modify your query to search against a different database and/or use advanced search options
