DNA polymerase I is a family A polymerase which functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication and it has two functional domains, a 5'-3' polymerase and 5'-3' exonuclease domain.
DNA polymerase I; All proteins in this family for which functions are known are DNA ...
5-920
0e+00
DNA polymerase I; All proteins in this family for which functions are known are DNA polymerases Many also have an exonuclease motif. This family is based on the phylogenomic analysis of JA Eisen (1999, Ph.D. Thesis, Stanford University). [DNA metabolism, DNA replication, recombination, and repair]
Pssm-ID: 273160 [Multi-domain] Cd Length: 887 Bit Score: 986.84 E-value: 0e+00
Polymerase I functions primarily to fill DNA gaps that arise during DNA repair, recombination ...
544-917
0e+00
Polymerase I functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication; Family A polymerase (polymerase I) functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication. DNA-dependent DNA polymerases can be classified in six main groups based upon phylogenetic relationships with E. coli polymerase I (classA), E. coli polymerase II (class B), E.coli polymerase III (class C), euryarchaaeota polymerase II (class D), human polymerase beta (class x), E. coli UmuC/DinB and eukaryotic RAP 30/Xeroderma pigmentosum variant (class Y). Family A polymerase are found primarily in organisms related to prokaryotes and include prokaryotic DNA polymerase I (pol I) ,mitochondrial polymerase delta, and several bacteriphage polymerases including those from odd-numbered phage (T3, T5, and T7). Prokaryotic Pol Is have two functional domains located on the same polypeptide; a 5'-3' polymerase and 5'-3' exonuclease. Pol I uses its 5' nuclease activity to remove the ribonucleotide portion of newly synthesized Okazaki fragments and DNA polymerase activity to fill in the resulting gap. A combination of phylogenomic and signature sequence-based (or phonetic) approaches is used to understand the evolutionary relationships among bacteria. DNA polymerase I is one of the conserved proteins that is used to search for protein signatures. The structure of these polymerases resembles in overall morphology a cupped human right hand, with fingers (which bind an incoming nucleotide and interact with the single-stranded template), palm (which harbors the catalytic amino acid residues and also binds an incoming dNTP) and thumb (which binds double-stranded DNA) subdomains.
Pssm-ID: 176474 Cd Length: 377 Bit Score: 660.27 E-value: 0e+00
DNA polymerase I; All proteins in this family for which functions are known are DNA ...
5-920
0e+00
DNA polymerase I; All proteins in this family for which functions are known are DNA polymerases Many also have an exonuclease motif. This family is based on the phylogenomic analysis of JA Eisen (1999, Ph.D. Thesis, Stanford University). [DNA metabolism, DNA replication, recombination, and repair]
Pssm-ID: 273160 [Multi-domain] Cd Length: 887 Bit Score: 986.84 E-value: 0e+00
Polymerase I functions primarily to fill DNA gaps that arise during DNA repair, recombination ...
544-917
0e+00
Polymerase I functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication; Family A polymerase (polymerase I) functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication. DNA-dependent DNA polymerases can be classified in six main groups based upon phylogenetic relationships with E. coli polymerase I (classA), E. coli polymerase II (class B), E.coli polymerase III (class C), euryarchaaeota polymerase II (class D), human polymerase beta (class x), E. coli UmuC/DinB and eukaryotic RAP 30/Xeroderma pigmentosum variant (class Y). Family A polymerase are found primarily in organisms related to prokaryotes and include prokaryotic DNA polymerase I (pol I) ,mitochondrial polymerase delta, and several bacteriphage polymerases including those from odd-numbered phage (T3, T5, and T7). Prokaryotic Pol Is have two functional domains located on the same polypeptide; a 5'-3' polymerase and 5'-3' exonuclease. Pol I uses its 5' nuclease activity to remove the ribonucleotide portion of newly synthesized Okazaki fragments and DNA polymerase activity to fill in the resulting gap. A combination of phylogenomic and signature sequence-based (or phonetic) approaches is used to understand the evolutionary relationships among bacteria. DNA polymerase I is one of the conserved proteins that is used to search for protein signatures. The structure of these polymerases resembles in overall morphology a cupped human right hand, with fingers (which bind an incoming nucleotide and interact with the single-stranded template), palm (which harbors the catalytic amino acid residues and also binds an incoming dNTP) and thumb (which binds double-stranded DNA) subdomains.
Pssm-ID: 176474 Cd Length: 377 Bit Score: 660.27 E-value: 0e+00
DNA polymerase theta is a low-fidelity family A enzyme implicated in translesion synthesis and ...
604-916
3.31e-125
DNA polymerase theta is a low-fidelity family A enzyme implicated in translesion synthesis and in somatic hypermutation; DNA polymerase theta is a low-fidelity family A enzyme implicated in translesion synthesis (TLS) and in somatic hypermutation (SHM). DNA-dependent DNA polymerases can be classified in six main groups based upon phylogenetic relationships with E. coli polymerase I (classA), E. coli polymerase II (class B), E.coli polymerase III (class C), euryarchaaeota polymerase II (class D), human polymerase beta (class x), E. coli UmuC/DinB and eukaryotic RAP 30/Xeroderma pigmentosum variant (class Y). Family A polymerase functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication. Pol theta is an exception among family A polymerases and generates processive single base substitutions. Family A polymerase are found primarily in organisms related to prokaryotes and include prokaryotic DNA polymerase I (pol I) ,mitochondrial polymerase delta, and several bacteriphage polymerases including those from odd-numbered phage (T3, T5, and T7). Prokaryotic Pol Is have two functional domains located on the same polypeptide; a 5'-3' polymerase and 5'-3' exonuclease. Pol I uses its 5' nuclease activity to remove the ribonucleotide portion of newly synthesized Okazaki fragments and DNA polymerase activity to fill in the resulting gap. Polymerase theta mostly has amino-terminal helicase domain, a carboxy-terminal polymerase domain and an intervening space region.
Pssm-ID: 176475 Cd Length: 373 Bit Score: 383.11 E-value: 3.31e-125
DEDDy 3'-5' exonuclease domain of Escherichia coli DNA polymerase I and similar bacterial ...
341-535
4.26e-99
DEDDy 3'-5' exonuclease domain of Escherichia coli DNA polymerase I and similar bacterial family-A DNA polymerases; Escherichia coli-like Polymerase I (Pol I), a subgroup of family-A DNA polymerases, contains a DEDDy-type DnaQ-like 3'-5' exonuclease domain in the same polypeptide chain as the polymerase domain. The exonuclease domain contains three conserved sequence motifs termed ExoI, ExoII and ExoIII, with a specific YX(3)D pattern at ExoIII. These motifs are clustered around the active site and contain four conserved acidic residues that serve as ligands for the two metal ions required for catalysis. The 3'-5' exonuclease domain of DNA polymerases has a fundamental role in reducing polymerase errors and is involved in proofreading activity. E. coli DNA Pol I is involved in genome replication but is not the main replicating enzyme. It is also implicated in DNA repair.
Pssm-ID: 176651 [Multi-domain] Cd Length: 193 Bit Score: 307.91 E-value: 4.26e-99
DNA polymerase A type from plastids of higher plants possibly involve in DNA replication or in ...
566-918
1.61e-97
DNA polymerase A type from plastids of higher plants possibly involve in DNA replication or in the repair of errors occurring during replication; DNA polymerase A type from plastids of higher plants possibly involve in DNA replication or in the repair of errors occurring during replication. Family A polymerase functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication. DNA-dependent DNA polymerases can be classified in six main groups based upon phylogenetic relationships with E. coli polymerase I (classA), E. coli polymerase II (class B), E.coli polymerase III (class C), euryarchaaeota polymerase II (class D), human polymerase beta (class x), E. coli UmuC/DinB and eukaryotic RAP 30/Xeroderma pigmentosum variant (class Y). Family A polymerase are found primarily in organisms related to prokaryotes and include prokaryotic DNA polymerase I ,mitochondrial polymerase delta, and several bacteriphage polymerases including those from odd-numbered phage (T3, T5, and T7). The three-dimensional structure of plastid DNA polymerase has substantial similarity to Pol I. The structure of Pol I resembles in overall morphology a cupped human right hand, with fingers (which bind an incoming nucleotide and interact with the single-stranded template), palm (which harbors the catalytic amino acid residues and also binds an incoming dNTP) and thumb (which binds double-stranded DNA) subdomains.
Pssm-ID: 176477 Cd Length: 371 Bit Score: 310.48 E-value: 1.61e-97
Phylum Aquificae Pol A is different from Escherichia coli Pol A by three signature sequences; ...
602-916
2.20e-82
Phylum Aquificae Pol A is different from Escherichia coli Pol A by three signature sequences; Family A polymerase functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication. DNA-dependent DNA polymerases can be classified in six main groups based upon phylogenetic relationships with E. coli polymerase I (classA), E. coli polymerase II (class B), E.coli polymerase III (class C), euryarchaaeota polymerase II (class D), human polymerase beta (class x), E. coli UmuC/DinB and eukaryotic RAP 30/Xeroderma pigmentosum variant (class Y). Family A polymerase are found primarily in organisms related to prokaryotes and include prokaryotic DNA polymerase I ,mitochondrial polymerase delta, and several bacteriphage polymerases including those from odd-numbered phage (T3, T5, and T7). Prokaryotic Pol Is have two functional domains located on the same polypeptide; a 5'-3' polymerase and 5'-3' exonuclease. Pol I uses its 5' nuclease activity to remove the ribonucleotide portion of newly synthesized Okazaki fragments and DNA polymerase activity to fill in the resulting gap. A combination of phylogenomic and signature sequence-based (or phonetic) approaches is used to understand the evolutionary relationships among bacteria. DNA polymerase I is one of the conserved proteins that is used for phylogenetic anaylsis of bacteria. Species of the phylum Aquificae grow in extreme thermophilic environments. The Aquificae are non-spore-forming, Gram-negative rods and strictly thermophilic. Phylum Aquificae Pol A is different from E. coli Pol I by three signature sequences consisting of a 2 amino acids (aa) insert, a 5-6 aa insert and a 6 aa deletion. These signature sequences may provide a molecular marker for the family Aquificaceae and related species.
Pssm-ID: 176476 Cd Length: 324 Bit Score: 268.76 E-value: 2.20e-82
FEN-like PIN domains of PIN domain of the 5'-3' exonuclease of Thermus aquaticus DNA ...
6-162
2.74e-79
FEN-like PIN domains of PIN domain of the 5'-3' exonuclease of Thermus aquaticus DNA polymerase I (Taq) and homologs; The 5'-3' exonuclease (53EXO) PIN (PilT N terminus) domain of multi-domain DNA polymerase I and single domain protein homologs are included in this family. Taq contains a polymerase domain for synthesizing a new DNA strand and a 53EXO PIN domain for cleaving RNA primers or damaged DNA strands. Taq's 53EXO PIN domain recognizes and endonucleolytically cleaves a structure-specific DNA substrate that has a bifurcated downstream duplex and an upstream template-primer duplex that overlaps the downstream duplex by 1 bp. The 53EXO PIN domain cleaves the unpaired 5'-arm of the overlap flap DNA substrate. 5'-3' exonucleases are members of the structure-specific, 5' nuclease family (FEN-like) that catalyzes hydrolysis of DNA duplex-containing nucleic acid structures during DNA replication, repair, and recombination. Canonical members of the FEN-like family possess a PIN domain with a two-helical structure insert (also known as the helical arch, helical clamp or I domain) of variable length (approximately 16 to 800 residues), and at the C-terminus of the PIN domain a H3TH (helix-3-turn-helix) domain, an atypical helix-hairpin-helix-2-like region. Both the H3TH domain (not included in this model) and the helical arch/clamp region are involved in DNA binding. The PIN domain belongs to a large nuclease superfamily. The structural properties of the PIN domain indicate its putative active center, consisting of invariant acidic amino acid residues (putative metal-binding residues), is geometrically similar in the active center of structure-specific 5' nucleases, PIN-domain ribonucleases of eukaryotic rRNA editing proteins, and bacterial toxins of toxin-antitoxin (TA) operons.
Pssm-ID: 350209 Cd Length: 160 Bit Score: 253.83 E-value: 2.74e-79
Family A polymerase primarily fills DNA gaps that arise during DNA repair, recombination and ...
610-916
1.04e-77
Family A polymerase primarily fills DNA gaps that arise during DNA repair, recombination and replication; DNA polymerase family A, 5'-3' polymerase domain. Family A polymerase functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication. DNA-dependent DNA polymerases can be classified into six main groups based upon phylogenetic relationships with E. coli polymerase I (classA), E. coli polymerase II (class B), E.coli polymerase III (class C), euryarchaeota polymerase II (class D), human polymerase beta (class X), E. coli UmuC/DinB and eukaryotic RAP 30/Xeroderma pigmentosum variant (class Y). Family A polymerases are found primarily in organisms related to prokaryotes and include prokaryotic DNA polymerase I, mitochondrial polymerase gamma, and several bacteriophage polymerases including those from odd-numbered phage (T3, T5, and T7). Prokaryotic polymerase I (pol I) has two functional domains located on the same polypeptide; a 5'-3' polymerase and a 5'-3' exonuclease. Pol I uses its 5' nuclease activity to remove the ribonucleotide portion of newly synthesized Okazaki fragments and the DNA polymerase activity to fill in the resulting gap. The structure of these polymerases resembles in overall morphology a cupped human right hand, with fingers (which bind an incoming nucleotide and interact with the single-stranded template), palm (which harbors the catalytic amino acid residues and also binds an incoming dNTP) and thumb (which binds double-stranded DNA) subdomains.
Pssm-ID: 176473 [Multi-domain] Cd Length: 347 Bit Score: 256.96 E-value: 1.04e-77
inactive DEDDy 3'-5' exonuclease domain of Bacillus stearothermophilus DNA polymerase I and ...
349-533
1.24e-40
inactive DEDDy 3'-5' exonuclease domain of Bacillus stearothermophilus DNA polymerase I and similar family-A DNA polymerases; Bacillus stearothermophilus-like Polymerase I (Pol I), a subgroup of the family-A DNA polymerases, contains an inactive DnaQ-like 3'-5' exonuclease domain in the same polypeptide chain as the polymerase region. The exonuclease-like domain of these proteins possess the same fold as the Klenow fragment (KF) of Escherichia coli Pol I, but does not contain the four critical metal-binding residues necessary for activity. The function of this domain is unknown. It might act as a spacer between the polymerase and the 5'-3' exonuclease domains. Some members of this subgroup, such as those from Bacillus sphaericus and Thermus aquaticus, are thermostable DNA polymerases.
Pssm-ID: 176652 [Multi-domain] Cd Length: 178 Bit Score: 147.41 E-value: 1.24e-40
Polymerase I functions primarily to fill DNA gaps that arise during DNA repair, recombination ...
570-920
6.76e-32
Polymerase I functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication; Family A polymerase functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication. DNA-dependent DNA polymerases can be classified in six main groups based upon phylogenetic relationships with E. coli polymerase I (classA), E. coli polymerase II (class B), E.coli polymerase III (class C), euryarchaaeota polymerase II (class D), human polymerase beta (class x), E. coli UmuC/DinB and eukaryotic RAP 30/Xeroderma pigmentosum variant (class Y). Family A polymerase are found primarily in organisms related to prokaryotes and include prokaryotic DNA polymerase I ,mitochondrial polymerase delta, and several bacteriphage polymerases including those from odd-numbered phage (T3, T5, and T7). Prokaryotic Pol Is have two functional domains located on the same polypeptide; a 5'-3' polymerase and 5'-3' exonuclease. Pol I uses its 5' nuclease activity to remove the ribonucleotide portion of newly synthesized Okazaki fragments and DNA polymerase activity to fill in the resulting gap. A combination of phylogenomic and signature sequence-based (or phonetic) approaches is used to understand the evolutionary relationships among bacteria. DNA polymerase I is one of the conserved proteins that is used to search for protein signatures. The structure of these polymerases resembles in overall morphology a cupped human right hand, with fingers (which bind an incoming nucleotide and interact with the single-stranded template), palm (which harbors the catalytic amino acid residues and also binds an incoming dNTP) and thumb (which binds double-stranded DNA) subdomains.
Pssm-ID: 176480 Cd Length: 429 Bit Score: 129.86 E-value: 6.76e-32
DEDDy 3'-5' exonuclease domain of family-A DNA polymerases; The 3'-5' exonuclease domain of ...
345-505
2.90e-31
DEDDy 3'-5' exonuclease domain of family-A DNA polymerases; The 3'-5' exonuclease domain of family-A DNA polymerases has a fundamental role in reducing polymerase errors and is involved in proofreading activity. Family-A DNA polymerases contain a DnaQ-like exonuclease domain in the same polypeptide chain as the polymerase domain, similar to family-B DNA polymerases. The exonuclease domain contains three conserved sequence motifs termed ExoI, ExoII and ExoIII, which are clustered around the active site and contain four invariant acidic residues that serve as ligands for the two metal ions required for catalysis. The Klenow fragment (KF) of Escherichia coli Pol I, the Thermus aquaticus (Taq) Pol I, and Bacillus stearothermophilus (BF) Pol I are examples of family-A DNA polymerases. They are involved in nucleotide excision repair and in the processing of Okazaki fragments that are generated during lagging strand synthesis. The N-terminal domains of BF Pol I and Taq Pol I resemble the fold of the 3'-5' exonuclease domain of KF without the proofreading activity of KF. The four critical metal-binding residues are not conserved in BF Pol I and Taq Pol I, and they are unable to bind metals necessary for exonuclease activity.
Pssm-ID: 176649 [Multi-domain] Cd Length: 151 Bit Score: 119.78 E-value: 2.90e-31
3'-5' exonuclease; This domain is responsible for the 3'-5' exonuclease proofreading activity ...
326-513
3.57e-31
3'-5' exonuclease; This domain is responsible for the 3'-5' exonuclease proofreading activity of E. coli DNA polymerase I (polI) and other enzymes, it catalyzes the hydrolysis of unpaired or mismatched nucleotides. This domain consists of the amino-terminal half of the Klenow fragment in E. coli polI it is also found in the Werner syndrome helicase (WRN), focus forming activity 1 protein (FFA-1) and ribonuclease D (RNase D). Werner syndrome is a human genetic disorder causing premature aging; the WRN protein has helicase activity in the 3'-5' direction. The FFA-1 protein is required for formation of a replication foci and also has helicase activity; it is a homolog of the WRN protein. RNase D is a 3'-5' exonuclease involved in tRNA processing. Also found in this family is the autoantigen PM/Scl thought to be involved in polymyositis-scleroderma overlap syndrome.
Pssm-ID: 396266 [Multi-domain] Cd Length: 173 Bit Score: 120.10 E-value: 3.57e-31
DEDDy 3'-5' exonuclease domain of family-A DNA polymerases, RNase D, WRN, and similar proteins; ...
348-505
1.21e-30
DEDDy 3'-5' exonuclease domain of family-A DNA polymerases, RNase D, WRN, and similar proteins; DEDDy exonucleases, part of the DnaQ-like (or DEDD) exonuclease superfamily, catalyze the excision of nucleoside monophosphates at the DNA or RNA termini in the 3'-5' direction. They contain four invariant acidic residues in three conserved sequence motifs termed ExoI, ExoII and ExoIII. DEDDy exonucleases are classified as such because of the presence of a specific YX(3)D pattern at ExoIII. The four conserved acidic residues serve as ligands for the two metal ions required for catalysis. This family of DEDDy exonucleases includes the proofreading domains of family A DNA polymerases, as well as RNases such as RNase D and yeast Rrp6p. The Egalitarian (Egl) and Bacillus-like DNA Polymerase I subfamilies do not possess a completely conserved YX(3)D pattern at the ExoIII motif. In addition, the Bacillus-like DNA polymerase I subfamily has inactive 3'-5' exonuclease domains which do not possess the metal-binding residues necessary for activity.
Pssm-ID: 176656 [Multi-domain] Cd Length: 150 Bit Score: 118.11 E-value: 1.21e-30
H3TH domain of the 5'-3' exonuclease of Taq DNA polymerase I and homologs; H3TH ...
168-240
1.88e-30
H3TH domain of the 5'-3' exonuclease of Taq DNA polymerase I and homologs; H3TH (helix-3-turn-helix) domains of the 5'-3' exonuclease (53EXO) of mutli-domain DNA polymerase I and single domain protein homologs are included in this family. Taq DNA polymerase I contains a polymerase domain for synthesizing a new DNA strand and a 53EXO domain for cleaving RNA primers or damaged DNA strands. Taq's 53EXO recognizes and endonucleolytically cleaves a structure-specific DNA substrate that has a bifurcated downstream duplex and an upstream template-primer duplex that overlaps the downstream duplex by 1 bp. The 53EXO cleaves the unpaired 5'-arm of the overlap flap DNA substrate. 5'-3' exonucleases are members of the structure-specific, 5' nuclease family that catalyzes hydrolysis of DNA duplex-containing nucleic acid structures during DNA replication, repair, and recombination. These nucleases contain a PIN (PilT N terminus) domain with a helical arch/clamp region/I domain (not included here) and inserted within the PIN domain is an atypical helix-hairpin-helix-2 (HhH2)-like region. This atypical HhH2 region, the H3TH domain, has an extended loop with at least three turns between the first two helices, and only three of the four helices appear to be conserved. Both the H3TH domain and the helical arch/clamp region are involved in DNA binding. Studies suggest that a glycine-rich loop in the H3TH domain contacts the phosphate backbone of the template strand in the downstream DNA duplex. The nucleases within this family have a carboxylate rich active site that is involved in binding essential divalent metal ion cofactors (i. e., Mg2+ or Mn2+ or Zn2+) required for nuclease activity. The first metal binding site is composed entirely of Asp/Glu residues from the PIN domain, whereas, the second metal binding site is composed generally of two Asp residues from the PIN domain and two Asp residues from the H3TH domain. Together with the helical arch and network of amino acids interacting with metal binding ions, the H3TH region defines a positively charged active-site DNA-binding groove in structure-specific 5' nucleases.
Pssm-ID: 188618 [Multi-domain] Cd Length: 73 Bit Score: 114.42 E-value: 1.88e-30
FEN-like PIN domains of bacteriophage T3, T4 RNase H, T5-5'nuclease, and homologs; PIN (PilT N ...
4-144
3.36e-24
FEN-like PIN domains of bacteriophage T3, T4 RNase H, T5-5'nuclease, and homologs; PIN (PilT N terminus) domain of bacteriophage T5-5'nuclease (5'-3' exonuclease or T5FEN), bacteriophage T4 RNase H (T4FEN), bacteriophage T3 (T3 phage exodeoxyribonuclease) and other similar 5' nucleases are included in this family. T5-5'nuclease is a 5'-3'exodeoxyribonuclease that also exhibits endonucleolytic activity on flap structures (branched duplex DNA containing a free single-stranded 5'end). T4 RNase H, which removes the RNA primers that initiate lagging strand fragments, has 5'- 3'exonuclease activity on DNA/DNA and RNA/DNA duplexes and has endonuclease activity on flap or forked DNA structures. Bacteriophage T3 is believed to function in the removal of DNA-linked RNA primers and is essential for phage DNA replication and also necessary for host DNA degradation and phage genetic recombination. These nucleases are members of the structure-specific, 5' nuclease family (FEN-like) that catalyzes hydrolysis of DNA duplex-containing nucleic acid structures during DNA replication, repair, and recombination. Canonical members of the FEN-like family possess a PIN domain with a two-helical structure insert (also known as the helical arch, helical clamp or I domain) of variable length (approximately 16 to 800 residues), and at the C-terminus of the PIN domain a H3TH (helix-3-turn-helix) domain, an atypical helix-hairpin-helix-2-like region. Both the H3TH domain (not included in this model) and the helical arch/clamp region are involved in DNA binding. The PIN domain belongs to a large nuclease superfamily. The structural properties of the PIN domain indicate its putative active center, consisting of invariant acidic amino acid residues (putative metal-binding residues), is geometrically similar in the active center of structure-specific 5' nucleases, PIN-domain ribonucleases of eukaryotic rRNA editing proteins, and bacterial toxins of toxin-antitoxin (TA) operons. In the T5-5'nuclease, structure-specific endonuclease activity requires binding of a single metal ion in the high-affinity, metal binding site 1, whereas exonuclease activity requires both, the high-affinity, metal binding site 1 and the low-affinity, metal binding site 2 to be occupied by a divalent cofactor. The T5-5'nuclease is reported to be able to bind several metal ions including, Mg2+, Mn2+, Zn2+ and Co2+, as co-factors.
Pssm-ID: 350210 Cd Length: 158 Bit Score: 99.59 E-value: 3.36e-24
FEN-like PIN domains of the 5'-3' exonucleases of DNA polymerase I, bacteriophage T4 RNase H ...
6-144
7.24e-24
FEN-like PIN domains of the 5'-3' exonucleases of DNA polymerase I, bacteriophage T4 RNase H and T5-5' nucleases, and homologs; PIN (PilT N terminus) domains of the 5'-3' exonucleases (53EXO) of multi-domain DNA polymerase I and single domain protein homologs, as well as, the PIN domains of bacteriophage T5-5'nuclease (T5FEN or 5'-3'exonuclease), bacteriophage T4 RNase H (T4FEN), bacteriophage T3 (T3 phage exodeoxyribonuclease) and other similar nucleases are included in this family. The 53EXO of DNA polymerase I recognizes and endonucleolytically cleaves a structure-specific DNA substrate that has a bifurcated downstream duplex and an upstream template-primer duplex that overlaps the downstream duplex by 1 bp. The T5-5'nuclease is a 5'-3'exodeoxyribonuclease that also exhibits endonucleolytic activity on flap structures (branched duplex DNA containing a free single-stranded 5'end). T4 RNase H, which removes the RNA primers that initiate lagging strand fragments, has 5'- 3'exonuclease activity on DNA/DNA and RNA/DNA duplexes and has endonuclease activity on flap or forked DNA structures. These nucleases are members of the structure-specific, 5' nuclease family (FEN-like) that catalyzes hydrolysis of DNA duplex-containing nucleic acid structures during DNA replication, repair, and recombination. Canonical members of the FEN-like family possess a PIN domain with a two-helical structure insert (also known as the helical arch, helical clamp or I domain) of variable length (approximately 16 to 800 residues), and at the C-terminus of the PIN domain a H3TH (helix-3-turn-helix) domain, an atypical helix-hairpin-helix-2-like region. Both the H3TH domain (not included in this model) and the helical arch/clamp region are involved in DNA binding. The PIN domain belongs to a large nuclease superfamily. The structural properties of the PIN domain indicate its putative active center, consisting of invariant acidic amino acid residues (putative metal-binding residues), is geometrically similar in the active center of structure-specific 5' nucleases, PIN-domain ribonucleases of eukaryotic rRNA editing proteins, and bacterial toxins of toxin-antitoxin (TA) operons.
Pssm-ID: 350199 Cd Length: 158 Bit Score: 98.87 E-value: 7.24e-24
H3TH domains of structure-specific 5' nucleases (or flap endonuclease-1-like) involved in DNA ...
169-239
2.09e-17
H3TH domains of structure-specific 5' nucleases (or flap endonuclease-1-like) involved in DNA replication, repair, and recombination; The 5' nucleases of this superfamily are capable of both 5'-3' exonucleolytic activity and cleaving bifurcated or branched DNA, in an endonucleolytic, structure-specific manner, and are involved in DNA replication, repair, and recombination. The superfamily includes the H3TH (helix-3-turn-helix) domains of Flap Endonuclease-1 (FEN1), Exonuclease-1 (EXO1), Mkt1, Gap Endonuclease 1 (GEN1) and Xeroderma pigmentosum complementation group G (XPG) nuclease. Also included are the H3TH domains of the 5'-3' exonucleases of DNA polymerase I and single domain protein homologs, as well as, the bacteriophage T4 RNase H, T5-5'nuclease, and other homologs. These nucleases contain a PIN (PilT N terminus) domain with a helical arch/clamp region/I domain (not included here) and inserted within the C-terminal region of the PIN domain is an atypical helix-hairpin-helix-2 (HhH2)-like region. This atypical HhH2 region, the H3TH domain, has an extended loop with at least three turns between the first two helices, and only three of the four helices appear to be conserved. Both the H3TH domain and the helical arch/clamp region are involved in DNA binding. Studies suggest that a glycine-rich loop in the H3TH domain contacts the phosphate backbone of the template strand in the downstream DNA duplex. Typically, the nucleases within this superfamily have a carboxylate rich active site that is involved in binding essential divalent metal ion cofactors (i. e., Mg2+, Mn2+, Zn2+, or Co2+) required for nuclease activity. The first metal binding site is composed entirely of Asp/Glu residues from the PIN domain, whereas, the second metal binding site is composed generally of two Asp residues from the PIN domain and one or two Asp residues from the H3TH domain. Together with the helical arch and network of amino acids interacting with metal binding ions, the H3TH region defines a positively charged active-site DNA-binding groove in structure-specific 5' nucleases.
Pssm-ID: 188616 [Multi-domain] Cd Length: 71 Bit Score: 77.42 E-value: 2.09e-17
Polymerase I functions primarily to fill DNA gaps that arise during DNA repair, recombination ...
683-901
3.04e-09
Polymerase I functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication; Family A polymerase (polymerase I) functions primarily to fill DNA gaps that arise during DNA repair, recombination and replication. DNA-dependent DNA polymerases can be classified in six main groups based upon phylogenetic relationships with E. coli polymerase I (classA), E. coli polymerase II (class B), E.coli polymerase III (class C), euryarchaaeota polymerase II (class D), human polymerase beta (class x), E. coli UmuC/DinB and eukaryotic RAP 30/Xeroderma pigmentosum variant (class Y). Family A polymerase are found primarily in organisms related to prokaryotes and include prokaryotic DNA polymerase I ,mitochondrial polymerase delta, and several bacteriphage polymerases including those from odd-numbered phage (T3, T5, and T7). Prokaryotic Pol Is have two functional domains located on the same polypeptide; a 5'-3' polymerase and 5'-3' exonuclease. Pol I uses its 5' nuclease activity to remove the ribonucleotide portion of newly synthesized Okazaki fragments and DNA polymerase activity to fill in the resulting gap. A combination of phylogenomic and signature sequence-based (or phonetic) approaches is used to understand the evolutionary relationships among bacteria. DNA polymerase I is one of the conserved proteins that is used to search for protein signatures. The structure of these polymerases resembles in overall morphology a cupped human right hand, with fingers (which bind an incoming nucleotide and interact with the single-stranded template), palm (which harbors the catalytic amino acid residues and also binds an incoming dNTP) and thumb (which binds double-stranded DNA) subdomains.
Pssm-ID: 176479 [Multi-domain] Cd Length: 378 Bit Score: 59.95 E-value: 3.04e-09
DEDDy 3'-5' exonuclease domain of Ribonuclease D and similar proteins; Ribonuclease (RNase) D ...
340-514
1.02e-08
DEDDy 3'-5' exonuclease domain of Ribonuclease D and similar proteins; Ribonuclease (RNase) D is a bacterial enzyme involved in the maturation of small stable RNAs and the 3' maturation of tRNA. It contains a DEDDy-type DnaQ-like 3'-5' exonuclease domain possessing three conserved sequence motifs termed ExoI, ExoII and ExoIII, with a specific YX(3)D pattern at ExoIII. These motifs are clustered around the active site and contain four conserved acidic residues that serve as ligands for the two metal ions required for catalysis. In vivo, RNase D only becomes essential upon removal of other ribonucleases. Eukaryotic RNase D homologs include yeast Rrp6p, human PM/Scl-100, and the Drosophila melanogaster egalitarian protein.
Pssm-ID: 176654 [Multi-domain] Cd Length: 178 Bit Score: 55.62 E-value: 1.02e-08
DEDDy 3'-5' exonuclease domain of WRN and similar proteins; WRN is a unique RecQ DNA helicase ...
331-510
1.37e-07
DEDDy 3'-5' exonuclease domain of WRN and similar proteins; WRN is a unique RecQ DNA helicase exhibiting an exonuclease activity. It contains a DEDDy-type DnaQ-like 3'-5' exonuclease domain possessing three conserved sequence motifs termed ExoI, ExoII and ExoIII, with a specific YX(3)D pattern at ExoIII. These motifs are clustered around the active site and contain four conserved acidic residues that serve as ligands for the two metal ions required for catalysis. Mutations in the WRN gene cause Werner syndrome, an autosomal recessive disorder associated with premature aging and increased susceptibility to cancer and type II diabetes. WRN interacts with key proteins involved in DNA replication, recombination, and repair. It is believed to maintain genomic stability and life span by participating in DNA processes. WRN is stimulated by Ku70/80, an important regulator of genomic stability.
Pssm-ID: 176653 [Multi-domain] Cd Length: 170 Bit Score: 52.20 E-value: 1.37e-07
H3TH domain of Flap Endonuclease-1, a structure-specific, divalent-metal-ion dependent, 5' ...
170-223
1.10e-06
H3TH domain of Flap Endonuclease-1, a structure-specific, divalent-metal-ion dependent, 5' nuclease: Eukaryotic homologs; Members of this subgroup include the H3TH (helix-3-turn-helix) domains of eukaryotic Flap endonuclease-1 (FEN1), 5' nucleases. FEN1 is involved in multiple DNA metabolic pathways, including DNA replication processes (5' flap DNA endonuclease activity and double stranded DNA 5'-exonuclease activity) and DNA repair processes (long-patch base excision repair) in eukaryotes and archaea. Interaction between FEN1 and PCNA (Proliferating cell nuclear antigen) is an essential prerequisite to FEN1's DNA replication functionality and stimulates FEN1 nuclease activity by 10-50 fold. These nucleases contain a PIN (PilT N terminus) domain with a helical arch/clamp region/I domain (not included here) and inserted within the PIN domain is an atypical helix-hairpin-helix-2 (HhH2)-like region. This atypical HhH2 region, the H3TH domain, has an extended loop with at least three turns between the first two helices, and only three of the four helices appear to be conserved. Both the H3TH domain and the helical arch/clamp region are involved in DNA binding. Studies suggest that a glycine-rich loop in the H3TH domain contacts the phosphate backbone of the template strand in the downstream DNA duplex. The nucleases within this subfamily have a carboxylate rich active site that is involved in binding essential divalent metal ion cofactors (Mg2+ or Mn2+) required for nuclease activity. The first metal binding site is composed entirely of Asp/Glu residues from the PIN domain, whereas, the second metal binding site is composed generally of two Asp residues from the PIN domain and one Asp residue from the H3TH domain. Together with the helical arch and network of amino acids interacting with metal binding ions, the H3TH region defines a positively charged active-site DNA-binding groove in structure-specific 5' nucleases. Also, FEN1 has a C-terminal extension containing residues forming the consensus PIP-box - Qxx(M/L/I)xxF(Y/F) which serves to anchor FEN1 to PCNA.
Pssm-ID: 188627 [Multi-domain] Cd Length: 70 Bit Score: 46.77 E-value: 1.10e-06
H3TH domain of bacteriophage T3, T4 RNase H, T5-5' nucleases, and homologs; H3TH ...
177-205
9.16e-05
H3TH domain of bacteriophage T3, T4 RNase H, T5-5' nucleases, and homologs; H3TH (helix-3-turn-helix) domains of bacteriophage T5-5'nuclease (5'-3' exonuclease or T5FEN), bacteriophage T4 RNase H (T4FEN), bacteriophage T3 (T3 phage exodeoxyribonuclease) and other similar 5' nucleases are included in this family. The T5-5'nuclease is a 5'-3' exodeoxyribonuclease that also exhibits endonucleolytic activity on flap structures (branched duplex DNA containing a free single-stranded 5'end). T4 RNase H, which removes the RNA primers that initiate lagging strand fragments, has 5'- 3' exonuclease activity on DNA/DNA and RNA/DNA duplexes and has endonuclease activity on flap or forked DNA structures. Bacteriophage T3 is believed to function in the removal of DNA-linked RNA primers and is essential for phage DNA replication and also necessary for host DNA degradation and phage genetic recombination. These nucleases are members of the structure-specific, 5' nuclease family that catalyzes hydrolysis of DNA duplex-containing nucleic acid structures during DNA replication, repair, and recombination. They contain a PIN (PilT N terminus) domain with a helical arch/clamp region/I domain (not included here) and inserted within the PIN domain is an atypical helix-hairpin-helix-2 (HhH2)-like region. This atypical HhH2 region, the H3TH domain, has an extended loop with at least three turns between the first two helices, and only three of the four helices appear to be conserved. Both the H3TH domain and the helical arch/clamp region are involved in DNA binding. Studies suggest that a glycine-rich loop in the H3TH domain contacts the phosphate backbone of the template strand in the downstream DNA duplex. The nucleases within this family have a carboxylate rich active site that is involved in binding essential divalent metal ion cofactors required for nuclease activity. The first metal binding site (MBS-1) is composed entirely of Asp/Glu residues from the PIN domain, whereas, the second metal binding site (MBS-2) is composed generally of two Asp residues from the PIN domain and two Asp residues from the H3TH domain. In the T5-5'nuclease, structure-specific endonuclease activity requires binding of a single metal ion in the high-affinity, MBS-1, whereas exonuclease activity requires both, the high-affinity, MBS-1 and the low-affinity, MBS-2 to be occupied by a divalent cofactor. The T5-5'nuclease is reported to be able to bind several metal ions including, Mg2+, Mn2+, Zn2+ and Co2+, as co-factors. Together with the helical arch and network of amino acids interacting with metal binding ions, the H3TH region defines a positively charged active-site DNA-binding groove in structure-specific 5' nucleases.
Pssm-ID: 188619 [Multi-domain] Cd Length: 74 Bit Score: 41.71 E-value: 9.16e-05
H3TH domains of Flap endonuclease-1 (FEN1)-like structure specific 5' nucleases: FEN1 ...
170-217
2.30e-04
H3TH domains of Flap endonuclease-1 (FEN1)-like structure specific 5' nucleases: FEN1 (eukaryotic) and EXO1; The 5' nucleases within this family are capable of both 5'-3' exonucleolytic activity and cleaving bifurcated or branched DNA, in an endonucleolytic, structure-specific manner, and are involved in DNA replication, repair, and recombination. This family includes the H3TH (helix-3-turn-helix) domains of eukaryotic Flap Endonuclease-1 (FEN1), Exonuclease-1 (EXO1), and other eukaryotic homologs. These nucleases contain a PIN (PilT N terminus) domain with a helical arch/clamp region/I domain (not included here) and inserted within the PIN domain is an atypical helix-hairpin-helix-2 (HhH2)-like region. This atypical HhH2 region, the H3TH domain, has an extended loop with at least three turns between the first two helices, and only three of the four helices appear to be conserved. Both the H3TH domain and the helical arch/clamp region are involved in DNA binding. Studies suggest that a glycine-rich loop in the H3TH domain contacts the phosphate backbone of the template strand in the downstream DNA duplex. The nucleases within this family have a carboxylate rich active site that is involved in binding essential divalent metal ion cofactors (i. e., Mg2+, Mn2+, Zn2+, or Co2+) required for nuclease activity. The first metal binding site is composed entirely of Asp/Glu residues from the PIN domain, whereas, the second metal binding site is composed generally of two Asp residues from the PIN domain and one Asp residue from the H3TH domain. Together with the helical arch and network of amino acids interacting with metal binding ions, the H3TH region defines a positively charged active-site DNA-binding groove in structure-specific 5' nucleases.
Pssm-ID: 188621 [Multi-domain] Cd Length: 73 Bit Score: 40.21 E-value: 2.30e-04
H3TH domains of Flap endonuclease-1 (FEN1)-like structure specific 5' nucleases; The 5' ...
169-217
1.59e-03
H3TH domains of Flap endonuclease-1 (FEN1)-like structure specific 5' nucleases; The 5' nucleases within this family are capable of both 5'-3' exonucleolytic activity and cleaving bifurcated or branched DNA, in an endonucleolytic, structure-specific manner, and are involved in DNA replication, repair, and recombination. This family includes the H3TH (helix-3-turn-helix) domains of Flap Endonuclease-1 (FEN1), Exonuclease-1 (EXO1), Mkt1, Gap Endonuclease 1 (GEN1), Xeroderma pigmentosum complementation group G (XPG) nuclease, and other eukaryotic and archaeal homologs. These nucleases contain a PIN (PilT N terminus) domain with a helical arch/clamp region/I domain (not included here) and inserted within the PIN domain is an atypical helix-hairpin-helix-2 (HhH2)-like region. This atypical HhH2 region, the H3TH domain, has an extended loop with at least three turns between the first two helices, and only three of the four helices appear to be conserved. Both the H3TH domain and the helical arch/clamp region are involved in DNA binding. Studies suggest that a glycine-rich loop in the H3TH domain contacts the phosphate backbone of the template strand in the downstream DNA duplex. With the except of the Mkt1-like proteins, the nucleases within this family have a carboxylate rich active site that is involved in binding essential divalent metal ion cofactors (i. e., Mg2+, Mn2+, Zn2+, or Co2+) required for nuclease activity. The first metal binding site is composed entirely of Asp/Glu residues from the PIN domain, whereas, the second metal binding site is composed generally of two Asp residues from the PIN domain and one Asp residue from the H3TH domain. Together with the helical arch and network of amino acids interacting with metal binding ions, the H3TH region defines a positively charged active-site DNA-binding groove in structure-specific 5' nucleases.
Pssm-ID: 188617 [Multi-domain] Cd Length: 68 Bit Score: 37.96 E-value: 1.59e-03
H3TH domains of Flap endonuclease-1 (FEN1)-like structure specific 5' nucleases: FEN1 ...
169-216
2.05e-03
H3TH domains of Flap endonuclease-1 (FEN1)-like structure specific 5' nucleases: FEN1 (archaeal), GEN1, YEN1, and XPG; The 5' nucleases within this family are capable of both 5'-3' exonucleolytic activity and cleaving bifurcated or branched DNA, in an endonucleolytic, structure-specific manner, and are involved in DNA replication, repair, and recombination. This family includes the H3TH (helix-3-turn-helix) domains of archaeal Flap Endonuclease-1 (FEN1), Gap Endonuclease 1 (GEN1), Yeast Endonuclease 1 (YEN1), Xeroderma pigmentosum complementation group G (XPG) nuclease, and other eukaryotic and archaeal homologs. These nucleases contain a PIN (PilT N terminus) domain with a helical arch/clamp region/I domain (not included here) and inserted within the PIN domain is an atypical helix-hairpin-helix-2 (HhH2)-like region. This atypical HhH2 region, the H3TH domain, has an extended loop with at least three turns between the first two helices, and only three of the four helices appear to be conserved. Both the H3TH domain and the helical arch/clamp region are involved in DNA binding. Studies suggest that a glycine-rich loop in the H3TH domain contacts the phosphate backbone of the template strand in the downstream DNA duplex. With the except of the Mkt1-like proteins, the nucleases within this family have a carboxylate rich active site that is involved in binding essential divalent metal ion cofactors (i. e., Mg2+, Mn2+, Zn2+, or Co2+) required for nuclease activity. The first metal binding site is composed entirely of Asp/Glu residues from the PIN domain, whereas, the second metal binding site is composed generally of two Asp residues from the PIN domain and one Asp residue from the H3TH domain. Together with the helical arch and network of amino acids interacting with metal binding ions, the H3TH region defines a positively charged active-site DNA-binding groove in structure-specific 5' nucleases.
Pssm-ID: 188620 [Multi-domain] Cd Length: 52 Bit Score: 37.08 E-value: 2.05e-03
Database: CDSEARCH/cdd Low complexity filter: no Composition Based Adjustment: yes E-value threshold: 0.01
References:
Wang J et al. (2023), "The conserved domain database in 2023", Nucleic Acids Res.51(D)384-8.
Lu S et al. (2020), "The conserved domain database in 2020", Nucleic Acids Res.48(D)265-8.
Marchler-Bauer A et al. (2017), "CDD/SPARCLE: functional classification of proteins via subfamily domain architectures.", Nucleic Acids Res.45(D)200-3.
of the residues that compose this conserved feature have been mapped to the query sequence.
Click on the triangle to view details about the feature, including a multiple sequence alignment
of your query sequence and the protein sequences used to curate the domain model,
where hash marks (#) above the aligned sequences show the location of the conserved feature residues.
The thumbnail image, if present, provides an approximate view of the feature's location in 3 dimensions.
Click on the triangle for interactive 3D structure viewing options.
Functional characterization of the conserved domain architecture found on the query.
Click here to see more details.
This image shows a graphical summary of conserved domains identified on the query sequence.
The Show Concise/Full Display button at the top of the page can be used to select the desired level of detail: only top scoring hits
(labeled illustration) or all hits
(labeled illustration).
Domains are color coded according to superfamilies
to which they have been assigned. Hits with scores that pass a domain-specific threshold
(specific hits) are drawn in bright colors.
Others (non-specific hits) and
superfamily placeholders are drawn in pastel colors.
if a domain or superfamily has been annotated with functional sites (conserved features),
they are mapped to the query sequence and indicated through sets of triangles
with the same color and shade of the domain or superfamily that provides the annotation. Mouse over the colored bars or triangles to see descriptions of the domains and features.
click on the bars or triangles to view your query sequence embedded in a multiple sequence alignment of the proteins used to develop the corresponding domain model.
The table lists conserved domains identified on the query sequence. Click on the plus sign (+) on the left to display full descriptions, alignments, and scores.
Click on the domain model's accession number to view the multiple sequence alignment of the proteins used to develop the corresponding domain model.
To view your query sequence embedded in that multiple sequence alignment, click on the colored bars in the Graphical Summary portion of the search results page,
or click on the triangles, if present, that represent functional sites (conserved features)
mapped to the query sequence.
Concise Display shows only the best scoring domain model, in each hit category listed below except non-specific hits, for each region on the query sequence.
(labeled illustration) Standard Display shows only the best scoring domain model from each source, in each hit category listed below for each region on the query sequence.
(labeled illustration) Full Display shows all domain models, in each hit category below, that meet or exceed the RPS-BLAST threshold for statistical significance.
(labeled illustration) Four types of hits can be shown, as available,
for each region on the query sequence:
specific hits meet or exceed a domain-specific e-value threshold
(illustrated example)
and represent a very high confidence that the query sequence belongs to the same protein family as the sequences use to create the domain model
non-specific hits
meet or exceed the RPS-BLAST threshold for statistical significance (default E-value cutoff of 0.01, or an E-value selected by user via the
advanced search options)
the domain superfamily to which the specific and non-specific hits belong
multi-domain models that were computationally detected and are likely to contain multiple single domains
Retrieve proteins that contain one or more of the domains present in the query sequence, using the Conserved Domain Architecture Retrieval Tool
(CDART).
Modify your query to search against a different database and/or use advanced search options
