mannose-6-phosphate isomerase, class I, catalyzes the reversible isomerization of fructose-6-phosphate (F6P) and mannose-6-phosphate (M6P), the first committed step in the synthesis of mannosylated glycoproteins
mannose-6-phosphate isomerase, class I; The names phosphomannose isomerase and ...
2-311
9.25e-86
mannose-6-phosphate isomerase, class I; The names phosphomannose isomerase and mannose-6-phosphate isomerase are synonomous. This family contains two rather deeply branched groups. One group contains an experimentally determined phosphomannose isomerase of Streptococcus mutans as well as three uncharacterized paralogous proteins of Bacillus subtilis, all at more than 50 % identity to each other, plus a more distant homolog from Archaeoglobus fulgidus. The other group contains members from E. coli, budding yeast, Borrelia burgdorferi, etc. [Energy metabolism, Sugars]
Pssm-ID: 272966 [Multi-domain] Cd Length: 302 Bit Score: 259.67 E-value: 9.25e-86
Phosphomannose isomerase in bacteria and archaea, N-terminal cupin domain; This subfamily ...
7-214
5.19e-79
Phosphomannose isomerase in bacteria and archaea, N-terminal cupin domain; This subfamily contains type I phosphomannose isomerase (PMI; E.C. 5.3.1.8; also known as mannose-6-phosphate isomerase) found in many bacteria (e.g. Bacillus subtilis) and archaea. PMI catalyzes the reversible isomerization of fructose-6-phosphate (F6P) and mannose-6-phosphate (M6P), the first committed step in the synthesis of mannosylated glycoproteins. The active site, located within the N-terminal jelly roll-like beta-barrel cupin fold, contains a single essential zinc atom and forms a deep, open cavity large enough to contain M6P or F6P. PMI type I also has a C-terminal beta-barrel fold which has diverged considerably from the N-terminal domain and is not included here. This subfamily does not contain an alpha helical domain that exists in eukaryotic and some prokaryotic PMIs. F6P is a substrate for glycolysis and gluconeogenesis, while M6P is a substrate for production of activated mannose donor guanosine 5'-diphosphate D-mannose, an important precursor of mannosylated biomolecules such as glycoproteins, bacterial exopolysaccharides and fungal cell wall components. PMI is also essential for survival, virulence and possibly pathogenicity of some bacteria and protozoan parasites, as well as for cell wall integrity of certain yeasts. Thus, PMI is a potential target against fungal infections causing serious illness or death.
Pssm-ID: 380413 Cd Length: 173 Bit Score: 237.81 E-value: 5.19e-79
Phosphomannose isomerase type I, catalytic domain; This entry represents the catalytic domain ...
5-115
8.21e-24
Phosphomannose isomerase type I, catalytic domain; This entry represents the catalytic domain of Phosphomannose isomerase type I enzymes (EC 5.3.1.8) which contains a zinc-binding site. It is composed of beta-strands connected by long loops in a jelly roll conformation.
Pssm-ID: 466660 [Multi-domain] Cd Length: 143 Bit Score: 94.56 E-value: 8.21e-24
mannose-6-phosphate isomerase, class I; The names phosphomannose isomerase and ...
2-311
9.25e-86
mannose-6-phosphate isomerase, class I; The names phosphomannose isomerase and mannose-6-phosphate isomerase are synonomous. This family contains two rather deeply branched groups. One group contains an experimentally determined phosphomannose isomerase of Streptococcus mutans as well as three uncharacterized paralogous proteins of Bacillus subtilis, all at more than 50 % identity to each other, plus a more distant homolog from Archaeoglobus fulgidus. The other group contains members from E. coli, budding yeast, Borrelia burgdorferi, etc. [Energy metabolism, Sugars]
Pssm-ID: 272966 [Multi-domain] Cd Length: 302 Bit Score: 259.67 E-value: 9.25e-86
Phosphomannose isomerase in bacteria and archaea, N-terminal cupin domain; This subfamily ...
7-214
5.19e-79
Phosphomannose isomerase in bacteria and archaea, N-terminal cupin domain; This subfamily contains type I phosphomannose isomerase (PMI; E.C. 5.3.1.8; also known as mannose-6-phosphate isomerase) found in many bacteria (e.g. Bacillus subtilis) and archaea. PMI catalyzes the reversible isomerization of fructose-6-phosphate (F6P) and mannose-6-phosphate (M6P), the first committed step in the synthesis of mannosylated glycoproteins. The active site, located within the N-terminal jelly roll-like beta-barrel cupin fold, contains a single essential zinc atom and forms a deep, open cavity large enough to contain M6P or F6P. PMI type I also has a C-terminal beta-barrel fold which has diverged considerably from the N-terminal domain and is not included here. This subfamily does not contain an alpha helical domain that exists in eukaryotic and some prokaryotic PMIs. F6P is a substrate for glycolysis and gluconeogenesis, while M6P is a substrate for production of activated mannose donor guanosine 5'-diphosphate D-mannose, an important precursor of mannosylated biomolecules such as glycoproteins, bacterial exopolysaccharides and fungal cell wall components. PMI is also essential for survival, virulence and possibly pathogenicity of some bacteria and protozoan parasites, as well as for cell wall integrity of certain yeasts. Thus, PMI is a potential target against fungal infections causing serious illness or death.
Pssm-ID: 380413 Cd Length: 173 Bit Score: 237.81 E-value: 5.19e-79
Phosphomannose isomerase type I, catalytic domain; This entry represents the catalytic domain ...
5-115
8.21e-24
Phosphomannose isomerase type I, catalytic domain; This entry represents the catalytic domain of Phosphomannose isomerase type I enzymes (EC 5.3.1.8) which contains a zinc-binding site. It is composed of beta-strands connected by long loops in a jelly roll conformation.
Pssm-ID: 466660 [Multi-domain] Cd Length: 143 Bit Score: 94.56 E-value: 8.21e-24
type I phosphomannose isomerase in eukaryotes and bacteria, N-terminal cupin domain; This ...
76-185
2.39e-05
type I phosphomannose isomerase in eukaryotes and bacteria, N-terminal cupin domain; This subfamily contains type I phosphomannose isomerase (PMI; E.C. 5.3.1.8; also known as mannose-6-phosphate isomerase) found in eukaryotes and some bacteria such as Salmonella enterica. PMI catalyzes the reversible isomerization of fructose-6-phosphate (F6P) and mannose-6-phosphate (M6P), the first committed step in the synthesis of mannosylated glycoproteins. The active site, located within the N-terminal jelly roll-like beta-barrel cupin fold, contains a single essential zinc atom and forms a deep, open cavity large enough to contain M6P or F6P. PMI type I also has a C-terminal beta-barrel fold which has diverged considerably from the N-terminal domain and is not included here. This subfamily contains an alpha helical domain that is found in eukaryotic and some prokaryotic PMIs but is not present in their archaeal counterparts. F6P is a substrate for glycolysis and gluconeogenesis, while M6P is a substrate for production of activated mannose donor guanosine 5'-diphosphate D-mannose, an important precursor of mannosylated biomolecules such as glycoproteins, bacterial exopolysaccharides and fungal cell wall components. PMI is also essential for survival, virulence and possibly pathogenicity of some bacteria and protozoan parasites, as well as for cell wall integrity of certain yeasts. Thus, PMI is a potential target against fungal infections causing serious illness or death.
Pssm-ID: 380414 [Multi-domain] Cd Length: 247 Bit Score: 44.85 E-value: 2.39e-05
Database: CDSEARCH/cdd Low complexity filter: no Composition Based Adjustment: yes E-value threshold: 0.01
References:
Wang J et al. (2023), "The conserved domain database in 2023", Nucleic Acids Res.51(D)384-8.
Lu S et al. (2020), "The conserved domain database in 2020", Nucleic Acids Res.48(D)265-8.
Marchler-Bauer A et al. (2017), "CDD/SPARCLE: functional classification of proteins via subfamily domain architectures.", Nucleic Acids Res.45(D)200-3.
of the residues that compose this conserved feature have been mapped to the query sequence.
Click on the triangle to view details about the feature, including a multiple sequence alignment
of your query sequence and the protein sequences used to curate the domain model,
where hash marks (#) above the aligned sequences show the location of the conserved feature residues.
The thumbnail image, if present, provides an approximate view of the feature's location in 3 dimensions.
Click on the triangle for interactive 3D structure viewing options.
Functional characterization of the conserved domain architecture found on the query.
Click here to see more details.
This image shows a graphical summary of conserved domains identified on the query sequence.
The Show Concise/Full Display button at the top of the page can be used to select the desired level of detail: only top scoring hits
(labeled illustration) or all hits
(labeled illustration).
Domains are color coded according to superfamilies
to which they have been assigned. Hits with scores that pass a domain-specific threshold
(specific hits) are drawn in bright colors.
Others (non-specific hits) and
superfamily placeholders are drawn in pastel colors.
if a domain or superfamily has been annotated with functional sites (conserved features),
they are mapped to the query sequence and indicated through sets of triangles
with the same color and shade of the domain or superfamily that provides the annotation. Mouse over the colored bars or triangles to see descriptions of the domains and features.
click on the bars or triangles to view your query sequence embedded in a multiple sequence alignment of the proteins used to develop the corresponding domain model.
The table lists conserved domains identified on the query sequence. Click on the plus sign (+) on the left to display full descriptions, alignments, and scores.
Click on the domain model's accession number to view the multiple sequence alignment of the proteins used to develop the corresponding domain model.
To view your query sequence embedded in that multiple sequence alignment, click on the colored bars in the Graphical Summary portion of the search results page,
or click on the triangles, if present, that represent functional sites (conserved features)
mapped to the query sequence.
Concise Display shows only the best scoring domain model, in each hit category listed below except non-specific hits, for each region on the query sequence.
(labeled illustration) Standard Display shows only the best scoring domain model from each source, in each hit category listed below for each region on the query sequence.
(labeled illustration) Full Display shows all domain models, in each hit category below, that meet or exceed the RPS-BLAST threshold for statistical significance.
(labeled illustration) Four types of hits can be shown, as available,
for each region on the query sequence:
specific hits meet or exceed a domain-specific e-value threshold
(illustrated example)
and represent a very high confidence that the query sequence belongs to the same protein family as the sequences use to create the domain model
non-specific hits
meet or exceed the RPS-BLAST threshold for statistical significance (default E-value cutoff of 0.01, or an E-value selected by user via the
advanced search options)
the domain superfamily to which the specific and non-specific hits belong
multi-domain models that were computationally detected and are likely to contain multiple single domains
Retrieve proteins that contain one or more of the domains present in the query sequence, using the Conserved Domain Architecture Retrieval Tool
(CDART).
Modify your query to search against a different database and/or use advanced search options
