phage tail tape measure protein similar to Escherichia virus Lambda tape measure protein, also called minor tail protein H, which controls tail length by stopping tail tube protein polymerization
phage tail tape measure protein, lambda family; This model represents a relatively ...
513-841
1.18e-77
phage tail tape measure protein, lambda family; This model represents a relatively well-conserved region near the C-terminus of the tape measure protein of a lambda and related phage. This protein, which controls phage tail length, is typically about 1000 residues in length. Both low-complexity sequence and insertion/deletion events appear common in this family. Mutational studies suggest a ruler or template role in the determination of phage tail length. Similar behavior is attributed to proteins from distantly related or unrelated families in other phage. [Mobile and extrachromosomal element functions, Prophage functions]
The actual alignment was detected with superfamily member TIGR01541:
Pssm-ID: 273681 [Multi-domain] Cd Length: 332 Bit Score: 255.53 E-value: 1.18e-77
Prophage tail length tape measure protein; This family represents a conserved region located ...
66-304
3.02e-33
Prophage tail length tape measure protein; This family represents a conserved region located towards the N-terminal end of prophage tail length tape measure protein (TMP). TMP is important for assembly of phage tails and involved in tail length determination. Mutated forms TMP cause tail fibres to be shortened.
The actual alignment was detected with superfamily member pfam06791:
Pssm-ID: 429120 Cd Length: 205 Bit Score: 127.45 E-value: 3.02e-33
phage tail tape measure protein, lambda family; This model represents a relatively ...
513-841
1.18e-77
phage tail tape measure protein, lambda family; This model represents a relatively well-conserved region near the C-terminus of the tape measure protein of a lambda and related phage. This protein, which controls phage tail length, is typically about 1000 residues in length. Both low-complexity sequence and insertion/deletion events appear common in this family. Mutational studies suggest a ruler or template role in the determination of phage tail length. Similar behavior is attributed to proteins from distantly related or unrelated families in other phage. [Mobile and extrachromosomal element functions, Prophage functions]
Pssm-ID: 273681 [Multi-domain] Cd Length: 332 Bit Score: 255.53 E-value: 1.18e-77
Prophage tail length tape measure protein; This family represents a conserved region located ...
66-304
3.02e-33
Prophage tail length tape measure protein; This family represents a conserved region located towards the N-terminal end of prophage tail length tape measure protein (TMP). TMP is important for assembly of phage tails and involved in tail length determination. Mutated forms TMP cause tail fibres to be shortened.
Pssm-ID: 429120 Cd Length: 205 Bit Score: 127.45 E-value: 3.02e-33
Lambda phage tail tape-measure protein (Tape_meas_lam_C); This represents a relatively ...
655-730
1.08e-19
Lambda phage tail tape-measure protein (Tape_meas_lam_C); This represents a relatively well-conserved region near the C terminus of the tape measure protein of a lambda and related phage. The protein, which controls phage tail length, is typically about 1000 residues in length. Both low-complexity sequence and insertion/deletion events appear common in this family. Mutational studies suggest a ruler or template role in the determination of phage tail length. Similar behaviour is attributed to proteins from distantly related or unrelated families in other phage.
Pssm-ID: 430770 [Multi-domain] Cd Length: 76 Bit Score: 83.87 E-value: 1.08e-19
phage tail tape measure protein, lambda family; This model represents a relatively ...
513-841
1.18e-77
phage tail tape measure protein, lambda family; This model represents a relatively well-conserved region near the C-terminus of the tape measure protein of a lambda and related phage. This protein, which controls phage tail length, is typically about 1000 residues in length. Both low-complexity sequence and insertion/deletion events appear common in this family. Mutational studies suggest a ruler or template role in the determination of phage tail length. Similar behavior is attributed to proteins from distantly related or unrelated families in other phage. [Mobile and extrachromosomal element functions, Prophage functions]
Pssm-ID: 273681 [Multi-domain] Cd Length: 332 Bit Score: 255.53 E-value: 1.18e-77
Prophage tail length tape measure protein; This family represents a conserved region located ...
66-304
3.02e-33
Prophage tail length tape measure protein; This family represents a conserved region located towards the N-terminal end of prophage tail length tape measure protein (TMP). TMP is important for assembly of phage tails and involved in tail length determination. Mutated forms TMP cause tail fibres to be shortened.
Pssm-ID: 429120 Cd Length: 205 Bit Score: 127.45 E-value: 3.02e-33
Lambda phage tail tape-measure protein (Tape_meas_lam_C); This represents a relatively ...
655-730
1.08e-19
Lambda phage tail tape-measure protein (Tape_meas_lam_C); This represents a relatively well-conserved region near the C terminus of the tape measure protein of a lambda and related phage. The protein, which controls phage tail length, is typically about 1000 residues in length. Both low-complexity sequence and insertion/deletion events appear common in this family. Mutational studies suggest a ruler or template role in the determination of phage tail length. Similar behaviour is attributed to proteins from distantly related or unrelated families in other phage.
Pssm-ID: 430770 [Multi-domain] Cd Length: 76 Bit Score: 83.87 E-value: 1.08e-19
chromosome segregation protein SMC, primarily archaeal type; SMC (structural maintenance of ...
418-654
1.48e-03
chromosome segregation protein SMC, primarily archaeal type; SMC (structural maintenance of chromosomes) proteins bind DNA and act in organizing and segregating chromosomes for partition. SMC proteins are found in bacteria, archaea, and eukaryotes. It is found in a single copy and is homodimeric in prokaryotes, but six paralogs (excluded from this family) are found in eukarotes, where SMC proteins are heterodimeric. This family represents the SMC protein of archaea and a few bacteria (Aquifex, Synechocystis, etc); the SMC of other bacteria is described by TIGR02168. The N- and C-terminal domains of this protein are well conserved, but the central hinge region is skewed in composition and highly divergent. [Cellular processes, Cell division, DNA metabolism, Chromosome-associated proteins]
Pssm-ID: 274009 [Multi-domain] Cd Length: 1164 Bit Score: 42.36 E-value: 1.48e-03
Database: CDSEARCH/cdd Low complexity filter: no Composition Based Adjustment: yes E-value threshold: 0.01
References:
Wang J et al. (2023), "The conserved domain database in 2023", Nucleic Acids Res.51(D)384-8.
Lu S et al. (2020), "The conserved domain database in 2020", Nucleic Acids Res.48(D)265-8.
Marchler-Bauer A et al. (2017), "CDD/SPARCLE: functional classification of proteins via subfamily domain architectures.", Nucleic Acids Res.45(D)200-3.
of the residues that compose this conserved feature have been mapped to the query sequence.
Click on the triangle to view details about the feature, including a multiple sequence alignment
of your query sequence and the protein sequences used to curate the domain model,
where hash marks (#) above the aligned sequences show the location of the conserved feature residues.
The thumbnail image, if present, provides an approximate view of the feature's location in 3 dimensions.
Click on the triangle for interactive 3D structure viewing options.
Functional characterization of the conserved domain architecture found on the query.
Click here to see more details.
This image shows a graphical summary of conserved domains identified on the query sequence.
The Show Concise/Full Display button at the top of the page can be used to select the desired level of detail: only top scoring hits
(labeled illustration) or all hits
(labeled illustration).
Domains are color coded according to superfamilies
to which they have been assigned. Hits with scores that pass a domain-specific threshold
(specific hits) are drawn in bright colors.
Others (non-specific hits) and
superfamily placeholders are drawn in pastel colors.
if a domain or superfamily has been annotated with functional sites (conserved features),
they are mapped to the query sequence and indicated through sets of triangles
with the same color and shade of the domain or superfamily that provides the annotation. Mouse over the colored bars or triangles to see descriptions of the domains and features.
click on the bars or triangles to view your query sequence embedded in a multiple sequence alignment of the proteins used to develop the corresponding domain model.
The table lists conserved domains identified on the query sequence. Click on the plus sign (+) on the left to display full descriptions, alignments, and scores.
Click on the domain model's accession number to view the multiple sequence alignment of the proteins used to develop the corresponding domain model.
To view your query sequence embedded in that multiple sequence alignment, click on the colored bars in the Graphical Summary portion of the search results page,
or click on the triangles, if present, that represent functional sites (conserved features)
mapped to the query sequence.
Concise Display shows only the best scoring domain model, in each hit category listed below except non-specific hits, for each region on the query sequence.
(labeled illustration) Standard Display shows only the best scoring domain model from each source, in each hit category listed below for each region on the query sequence.
(labeled illustration) Full Display shows all domain models, in each hit category below, that meet or exceed the RPS-BLAST threshold for statistical significance.
(labeled illustration) Four types of hits can be shown, as available,
for each region on the query sequence:
specific hits meet or exceed a domain-specific e-value threshold
(illustrated example)
and represent a very high confidence that the query sequence belongs to the same protein family as the sequences use to create the domain model
non-specific hits
meet or exceed the RPS-BLAST threshold for statistical significance (default E-value cutoff of 0.01, or an E-value selected by user via the
advanced search options)
the domain superfamily to which the specific and non-specific hits belong
multi-domain models that were computationally detected and are likely to contain multiple single domains
Retrieve proteins that contain one or more of the domains present in the query sequence, using the Conserved Domain Architecture Retrieval Tool
(CDART).
Modify your query to search against a different database and/or use advanced search options
